Rockwell Automation Publication 20A-TDJ-EN-P – July PowerFlex 70 Adjustable Frequency AC Drive User Manual, publication 20A-UM Publication 20A-INB-EN-P. The PowerFlex 70 drive contains protective MOVs and Common Mode. Capacitors referenced to ground (see below). To guard. posts; United States. Posted 1 Jun · llautomation. com/idc/groups/literature/documents/um/
|Country:||Republic of Macedonia|
|Published (Last):||4 July 2015|
|PDF File Size:||15.40 Mb|
|ePub File Size:||14.71 Mb|
|Price:||Free* [*Free Regsitration Required]|
Factory default setting is 12 volts. Press the Enter key to display the Start-Up Menu. Do not reduce wire gauge when using higher temperature wire. You can Upload dn parameters from the drive to the HMI Start-Up of the PowerFlex Table of Contents Add to my manuals Add.
Drive Stopped Check parameter [Start Inhibits].
Rockwell Automation 20A PowerFlex 70 Power Jumpers User Manual
Step 1 Read the General Precautions It is very easy to do. Other objects can occupy this space; however, airflow must not be reduced and inlet air temperature must not Rockwell Automation distributor or sales representative.
Page of 52 Go.
Install original HMI on the new drive? Posted 4 Jun To avoid an electric shock hazard, verify that the voltage on the bus capacitors has discharged before performing any work on the drive. Sign in Already have an account? Posted 31 May If the Safe-Off board is removed from the drive, pins 3 and 4 of the Safe-Off Connector must be jumpered for the drive to run. The information provided Does Not replace the User Manual and is intended for qualified drive service personnel only.
Then put that HMI into the new drive and Download the parameters into the new drive.
Rockwell Automation 20A PowerFlex 70 Power Jumpers User Manual | 6 pages
Forgive me but it sounds like you don’t have much experience with VFD’s Register a new account. Page 40 Running S. Started by wendaiyu31 May When reading this document, look for this symbol “. For detailed PowerFlex 70 information including advanced start-up. Also See for PowerFlex 70 Reference manual – pages User manual – pages Installation instructions manual – 56 pages. Most drives will have a jumper storage area inside the front cover.
Press Esc to acknowledge the fault. If you have an LCD HIM, two methods are provided, allowing the user to select the desired level needed for the application. The cause must be corrected before the fault can be cleared. Powerflex series medium voltage ac drives pages. Refer to user manual Sign In Sign Up.
Start During a Start Up, the majority of applications require changes to only a few parameters. Allen-Bradley Drives Technical Support. If present, simply remove the protective cover, install or remove jumper and replace cover.
With these parameters, you can set the following functions Not Selected Main Menu: Extra jumpers or jumpers that have been removed should be stored in this location for use at a later time.